Translate this page

Meny

Søk på nettstedet:

Forfatter: supdig

Maintenance How To Remove The Fairings Of Your 1998 Honda CBR 600 F3

Maintenance How To Remove The Fairings Of Your 1998 Honda CBR 600 F3

all right everybody warned on an x-ray today I’m going to show you how to take the plastics off of your of a 1998 CBR 600 f3 all right first things first get your flat-head screwdriver you come right here next to the oil dipstick this black circle and you stick your screwdriver in there and switch it to open that’s oh yeah should just be coming up like that then you just go ahead and start pulling it off and needless to say be careful of the plastic tab there’s no actual screws that hold us in hold the sim there’s a little tab right there I think that one’s broke off on the Sun but you just you normally just get a screwdriver or something push that down and then pull it out the tab right right here come down each night Ricky doing this one and then it just pops off just like that after you got that in a safe place or it’s not going to get any scratches on it you get your size 5 Allen getting right through that sighs buff I’m not sure whether it’s metric or what but come right up here to this the sky this Gil piece right here and start undoing these bolts undo this and this bolt then once ,yamaha r6 fairings,you got those bolts out um as you can see it’s busted off right here I didn’t that’s not from the crash that’s from the previous owner.

I guess he didn’t really take his time to figure out how these couple things came off I just but normally you’d lift up and pull out but in this case just swings right out has a two hinges right there on the inside just go in there yeah and that comes away uh and then after that’s out of the way you can start doing undoing all these little um size five Allen screws all right here um that are in here and there’s quite a few of them there barely on there but first before you take those out you need to come down the bottom right here behind the front tire and get your screwdriver again and undo this screw which is a little hard to get in here and that pretty much just comes out with one two turn that’s like a special really weird-looking kind of screw and set that aside make sure you keep that plastic washer on it ,r1 fairings,so doesn’t scratch them okay so now you take your one two three drop for set these aside and now up six right up here about six and seven right up there at the tongue she’s got all seven of the screws out with the little lift there’s two plastic tabs right up here at the seal and I think T right here as well so be careful not to break those not like the these plastic tab but they’re just like like the ones that go in here just little extensions .

so you come off just like that that’s what I’m talking about those little tabs right there and you got your side piece and one half naked bike see this 0um normally have a bolt right here and another one on the other side as well but I took them out because they have a has a plastic clip so it doesn’t really as you can see it doesn’t really need the bolts and they’re just a big pain the bolts were so to get the seat off you know flat head and you can’t see that can just reach in here push in the plastic piece once you pop on you just pull this back and up and then your seat comes off and then here’s your battery right here take these two bolts out not just flips up here’s the compartment ,2015 r1 fairings,where your owners manual and tools would normally would be but you can put whatever you want in there as well and now at this point once you get the seat off all you have to do is repeat these steps on the other side except for this middle piece.

you can leave it halfway attach it off to you can if you want but I don’t I just leave it attached to one side I leave the bolt right here on this side in um so that just stays attached it makes it makes it easier when you put it back on already having this on here,cheap motorcycle fairings, all right on the other side now I already got this and the seat off and this off this piece right here so now one last little boat a little gentle pulling make sure you get that as the kickstand still got the centerpiece on it and congratulations you have just taken the fairings off of your 1998 Honda CBR 600 f3

The RED UNRELEASED JORDAN Proto MAX 720

The RED UNRELEASED JORDAN Proto MAX 720

this past weekend I had the pleasure of going to Charlotte North Carolina for the NBA all-star weekend and while I was there good folks over at Jordan Brand dropped off a small little package for me at my room so of course I wanted to share it with you guys and this is actually something that I’m pretty excited about I’m not exactly sure how it is going to be received because it is so different than what we expect from Jordan Brand but that’s kind of why I really like it because it is so different as sneaker heads we often kind of get in a in a phase where we like what we like and it’s always something that we’ve kind of seen before but this shoe breaks that mold something entirely new so with that being said let’s jump right inside now I don’t know if this is the retail box but it does get more of like a sportswear vibe which kind of actually fits with this shoe as you see here it says jump man on the front then it says zero zero zero and then it says 23 and then you have that same sort of number and logo around the box and then the box is just a regular brown and black but it does have these plus signs which is not something that we usually see on a Jordan box now based on this tag this is just a promo pair this is not necessarily the retail box or retail tag for that matter but this is a promo tag just so you know there so let’s take a look inside and then again here on the Box Jumpman zero zero zero two three inspired by greatness designed for flight if that doesn’t kind of tell you what the shoe is maybe it does maybe it doesn’t but let’s hop right into it here we go now we actually got a preview of this back in September or October .

I think it was this is the Jordan proto max 720 I think they’re officially they’re officially calling it yet the Jordan proto max 720 as most of you guys know let me take both these out of the box here 720 is Nikes new air technology that they’ve been doing that baby and it’s taking more of like a sportswear slant as opposed to a performance slant the 720 is really purely a lifestyle offering from Nike and in this case a lifestyle offering from Jordan brand and you see that on this sneaker so a couple of things first obviously the red and black is a traditional Jordan Brand colorway but then the shoe goes into a little further than that you have the 720 air unit here which is again the biggest air unit is used it before you have that air max branding that we see on the regular air max 720 and then you have the mixture of the Jordan logo right there,cheap jordan shoes, so I almost kind of see this as a collaboration between Nike and Jordans so this is like a Nike Jordan collab see here outsole seems to be really tough lots of nice rubber here it’s not too hard not too soft I can almost see someone hiking in these or just rocking these randomly now when we moved to the upper that’s when things get a little interesting so it has this sort of almost like a rip stop parachute sort of nylon feel to the upper to the textile now this is something that we’ve seen I believe this is the same stuff that they use on the react element 87 but instead of it being transparent its autonomously color of red here and that actually goes from the toe all the way to the heel the material is the same all the way through for the upper now they also have this strap here velcro strap that goes around to help keep you locked in in the back so the top Majan is gonna add a little extra lock down for your for your shoe if you need to be locked down these especially if you want to take these hiking that little extra lock down in the back is obviously nice real quick small design note here that they have the Jordan Wings logo here it’s not the actual logo it’s like an outline of the logo there to add a little bit of Jordan history to it then you see they have a big bright jump man there and then actually when you open this up you’ll see here at the heel right for the heel pool is they have a jump male level there and then they repeat the zero zero zero to three Jordan logo there on the strap that keeps the velcro that keeps the velcro locked inside now moving to the inside of the shoes take a look at this one here .

you see have what they call like a neoprene liner like a meal preen sockliner here so the tongue even though we have a tongue here it’s attached to like the neoprene sock liner and it actually snaps in giving you a little bit of separation here if you need that up well I guess when you’re putting on your shoes or pulling up a little bit there but again here they have more of that Jumpman branding where it’s jump man inspired jump man I can’t a second get in there let’s see jump man inspired by greatness designed for flight taking on that whole flight suit sort of mentality you see that there then the inside again has that neoprene sock liner ,cheap jordan 11,where you just kind of slide your foot in and I believe I don’t think you’re gonna have an issue with this one and maybe that’s why they added that snap there now that I think about it to help open that up so that you can slide your foot right in you know how sometimes when you have like that neoprene that one booty fit sometimes it’s hard to get your foot inside but here this opening is already wide enough I believe just to get pretty much anybody’s put in there but if you grab the heel and the tongue tags you’ll be able to kind of pull that open a little more to give you a little extra room to get in there now the the sock liner is attached .

you can’t pull it out although it is pretty loose which allows this like ripstop nylon upper to kind of like flow freely around the rest of the shoe which gives a very interesting vibe here and see if I reach all the way inside yeah it’s loose all the way around except for down here at the toe where it seems like it’s so it’s so din down here at the toe but just this section right here which is very interesting now they have some coordinates here I’m have to look these up actually you guys to let me know what they mean here it’s a 45 5:07 North 120 to 827 West my thought I’m just guessing here that that’s the Nike campus I don’t know but just if you guys know what that is so 45 5:07 north one twenty two point eight to seven West so if you guys know what that is let me know down in the comments below and then finally we have zero zero zero two three right there again and then we have the name of the shoe the proto 720 there again with the plus so obviously the plus I believe refers to the airmax unit at obviously as this is the largest airmax unit that they have offered and then for the heels here you see Jumpman and then zero zero zero two three kind of hammering home mat two three obviously which is a big number when it comes to jordan brand and they’re you know just a quick look at the outsole .

so overall i think the shoe is very interesting so what i’m gonna do right now i’m gonna give you guys just a quick on foot look at these just to kind of see what see didn’t give you a chance to see how they look on feet i think this is gonna be a very interesting shoe and i really want to see what people think about these let me know down in the comments below and I think I’m excited that Jordan Brand is doing something different that they’re looking outside of the box they’re looking outside of the traditional retros a lot of times we always complain about Jordan Brand not doing something new something,cheap jordans, innovative something that’s totally different from what we know them for and I believe this is it this kind of carries on that outside the box sort of feel when it comes to Jordan Brandon really pushes the envelope for what we expect from the brand and I’m pretty excited about that I like that look I like that feel anyway but that being said as always guys I’m Jacques Slade make sure you like favorite and subscribe and if you really really really like what you see here why don’t you go ahead and turn on the notifications as always I appreciate you and I’ll see you soon peace alright let’s do this all feet.

DS 2008 Nike Air Jordan Collezione Countdown Pack

DS 2008 Nike Air Jordan Collezione Countdown Pack

I actually through ten dollars in three times for total thirty bucks for a raffle for 2002 deadstock Danny Koopa Nike Dunk ESPYs and I won and that’s awesome because I don’t think I will ever own a pair of desktop Danny coupe was especially being a Nike SB guy wearing Blazers right now but you know they’ve done other raffles a biggie B’s they did a whole bunch other stuff and you know I throw down at every raffle just because there’s a chance you know I mean like 25 bucks to win something that might be worth 200 or more dollars you know why not you know some people will like when the raffle is just immediately resell some people will keep like what I did with the soup was like those are those are just very important shoots me so as I’m sure you saw by the title of the video up there this is an unboxing for the entire Nike Air Jordans countdown pack from 2008 there are 11 of these empty boxes over in the corner I didn’t want to take up time opening all those boxes but I haven’t opened any of the countdown packed yet I don’t know which ones are which but my entire course from this trip it’s filled with empty boxes and all these common ester over here and I love them so this is going to take some time a little background on the countdown pack if you’re not aware you probably should be if you’re watching this video but um and when they released the to the 23 in 2008 every month after that they did in January every month after that they release a count on back what they did was they took few of the Jordan and for example like they put a pack of the twos and 21 together so they all added up to 23 which is you know just a cool idea so they did that and you know someone had never been retro before I think the six teams and seven teams had never been retro before so I mean that was pretty important what they want was a lot of flats the colorways believe me you know they’re not anything else like I’m just very excited and then thank you that magnetism for for being able to provide this you know collection so I’m going to jump right in right away so I’m going to grab that’s one so this is how they come this is the over box jumping out on top of this you lift it up .

where I’m left with you and then you have the pact with my god and you open them up and these right here and it looks like up these are the sevens and that means that the other ones will probably be the sixteen yeah cool so I’m going to I’m just going to open Watson show you guys so here’s the seven I can get it out seven these are called hair just probably just like the seven they release besides these these a lot of bold colors this is probably the only non black red or white colourway or gray in in the entire pack but that’s what’s out of order they were just the borrowed term from my other video cube rainbow but they’re not I mean whatever and here’s the 16 top fell off here got that cover thing on them I was a little bit yellow from a normal so once against them is 16 I think what it looks like how these are all put together is that like an art color in a light color just kind of like a leaf .

so we’ll find out as we go along coming how to come hot gotta get that one down there’s no one up I don’t want to achieve it I’m going to have to synthesize on the bottom so this is the 21 of the two here’s the point one I do really like this one one I just think about the bombs are what I think of the coolest very texture very cool looking it’s very soft shoot bang bang in there so the tubes free basic contrast from from the other ones play their way from black and do it up to – your Jordan thing on the tongue whoop I can’t read it upside down what’s the heck is NAB Raj go there’s that one flips back in your home fell up businesses he with the be okay .cheap jordan shoes, now this twenty20 and the ones very excited about the one I just always like to run so here’s the one mmm very cool this entire packet size 12 which is my size and this power bag is desktop I don’t know holla where you do the loop pretty cool back these you can clearly tell the the newer LeBrons we’re inspired by the bottles on this which is fine these are an extremely underrated Georgian lighting and I think these always have looked cool I’ve never had a pair of myself make their extremely underrated there might be my favorite pack until I get to feelin this is a 12 so IDs all came in randomly so I just like unbox them just look inside them but I put them over over to my right just kind of in no particular order so just coming out as they are this is a nine these are really cool . there’s a nine that means that these are the 14-foot you sign away really clean lines on stitching is probably the most prevalent on the use of all the Jordans in my opinion so for teens none out the way then you they’re almost like perfectly square but not really you have to kind of like yes which can they go it .

I’m not taking them now kind of them try to signal based on how close are we these are the five lace lock little yellowing on the bottom normal and trace on the side and the 18 got a little brush here you can forget a weirdo these are probably one of the more like flashy releases in life and look suede is really nice on here and look at that alright again the work this is fact MV 18 got into the box right the first time what’s this one these have been sitting in our it up in a way I just got the last five today they’ve been taking their sweet time getting here which is you know I’m no one’s fault stuff you tell us and touch them at all times not really held up it just takes a while to get here anyway easily eight pretty crazy they always have like a weird better looking stuff on them guys are pretty neat that means due to phenomenal math skills that these are the fifteenth I really like fifteen not a huge fan of these fifteen is ridiculous I like the bottoms on the 15th ,cheap jordans for sale,I think this is cool kind of shame when they actually award a lot because you can tell they wear off it comes I think they want to kind of real futuristic with those with the fifteen came out right down keep going keep going guys Danielle the rivers lot in this movie you five more these are right here look here’s the 1919 czar pretty cool take these all velcro there’s the night just like new feet outdoor chair material on it I do remember correctly the 19th have those really thin like in latest these for these are dope these are awesome boards are probably between force and 11 for my favorite Jordan I really like the these are cool these are really really cool it’s going to be hard not to wear so cool I’m really happy with the 11-12 aren’t showing up yet because a lot could get those bees that much more fun for me what happened I have a fan of a limit is twenty two threes .

I guess these are the twenty this stressing saw plays are weird I had a pair of the quick strike play they’re not ugly they’re just kind of weird dressing to the ankles I’m uncomfortable not got a lot but then again I’m not the greatest best ball player in the world and I say that being used abroad and Oh black cement these these are cool two fours and threes right in a row whoa baby these are cool these are really really cool all right get in there Sigma guys it was the end of the 20th and the three funny thing is I’m moving in like a month ago so I got these not even looks pretty I got these and I’m even gonna ship them out this is what go so lift this one yes work that down oh okay ,cheap jordan 11,so these are pride 6 vs 6 of 17 these are the Carmine’s fixes not huge fan of these I’m not really huge on when you work together these are these are cool these are not as well as needed I won’t have anticipated it would be but I’m in a cool and here are seventeen seventeen has this like peel-off thing on the sides here top yes placed locks still there it is a cool the cover thing on the laces those dad yeah these are very like robot looking like you’d wear them on the room you would a robot to where the robot wore shoes which would be pointless because why would a robot need shoes .

Auctmarts Fairings Review 2018 – CBR600RR 2005

Auctmarts Fairings Review 2018 – CBR600RR 2005

so we got most of them unwrapped and unboxed so far so good quality and paint is close to perfect for the red I was really expecting a duller red but they came through with what I wanted and then just a regular glossy black the tail I didn’t notice it was very very very small specks of black know if the camera will pick that up but right there but nothing to be worried about it all and then time to unbox the tank and the two side panels but overall very happy so one thing I did notice when it comes to the holes is that they’re not all uniform which is to be expected I think it’s from the paint drawing but the holes are not all uniform.

so you’ll definitely have to drill but I think that was expected that is going to look really good notice another little imperfection or is it see this what look like white little specks again not very noticeable and for what I paid I’m not complaining I see that hole right there looks like a rectangle what a quick Dremel should be fine where was that little piece I didn’t like oh yeah see it’s not that important if I can’t even find it so that is the tank tank looks good packaging ,yamaha r1 fairings,I would say it was definitely did a really good job cuz that’s what the old fairings are gonna go into I’m gonna keep all this packaging right down what’s what keep it nice and clean oh look a little dent in the tank right there that’s gonna be one of them out of all places I don’t know if you could see that again not the end of the world no real issues small very very minor little things like the paint covering the holes a very small little dent right there like the size of a I would say a lead pencil and so I’ll definitely see.

if I can get some kind of discount for that but other than that once they go on the bike is gonna look great came with the bolt kit the double bubble windscreen and then want to get them ceramic coated on Sunday keep you guys updated I would say the disassembly was pretty easy under 40 minutes om is usually easier,cheap motorcycle fairings, this is the shop that I got them coated at decided to get them coated do some research while they were still new turned out great the beating effect is crazy and they’re gonna stay new for a while since I only ride on nice days I definitely wanted to get my helmet done at the same time so that way .

I’m not constantly worrying about bugs on my visor scratching the gold visor that I got I was the helmet reassembly was definitely tricky took two times like two different days as it was very long and all the holes didn’t line up this is the final basically ,cbr500r fairings,what it looked like after everything I think it turned out great quality impressed with could have been better when it came to the fitment but it’s to be expected always go through eBay since you are protected as a buyer I was able to get some discounts because of that little nick on the tag plus some other stuff so if you guys have any questions let me know

After Green to White Wicked Fairings

After Green to White Wicked Fairings

alright guys so there’s gonna be a couple things I’m gonna recommend once you take off your original OEM plastics you’re gonna have to make sure you get all the screws and bolts out of each of the original fairings and then also you’re gonna need these basically what it is is a rubber grommet and then on the backside it compresses all right so these are your rubber grommets let’s see that’s what they look like all my fairing bolts right in here I’ve got these ones go to the bottom fairing zip if you’ve taken apart bikes a lot of times you can do this if not I would put it on a big sheet and organize it these clips right here how they work is there’s a circle on the top so if you see that circle it’s gonna be like that that’s how that’s how you’re gonna put put it in and then once it’s in you press this in it expands this section right here and then it gets stuck into the plastic and then it holds the plastics together and you can also categorize the bolts that you have for example these are the exterior fairing bolts these are gonna be the ones that you visibly see on the outside of the bike for me this thicker Bowl is gonna go on the bottom left and right fairing towards the back end where the pegs are these,yamaha r1 fairings, for example go to like the fairing headlight assembly in the front end so just organize your bolts and make sure you know where they go example a fairing doesn’t stick or it doesn’t want to stick I’m gonna go ahead and take this clip out and then show.

you what you guys do all right so here we have the east side this is the this is the side panel of the bike I’m going to show you guys what you need to do if for example the fairing just doesn’t clip in right or you didn’t put it in the right order and it doesn’t want to stay what you can do is get this double sided tape so this is just for an example okay and then what you’re gonna do is stretch it like that and then apply it where you need it to be rub that area down with rubbing alcohol just hold that down tack ,cbr500r fairings,it down and then just hold that there apply the bearing down and hold it for a second just hold that down for a bit and then hold it until it cools off and then it should stay Shin.

it’s going to be another one of these clips so you’re gonna have that clip and then just put it in then press down with like a screwdriver or something that has great so there you go also getting in the peddle grip which is basically this belt for looking stuff measure up to the size you have these clip these snap-on sections it’ll have a ring like that and it’ll just click into place ,cheap motorcycle fairings,so make sure you put those in the right sections that they need to be someone needs to go here line it up and then put these velcro pieces in the sections that you need if you need to you can put a good X for a sharpie and you can play some of the exact same spots and it is imperative that you wipe this off and rub it off with rubbing alcohol you need that surface as clean as possible obviously with CB ours you can like change that whole cover cap for the gas tank but a bunch of other bikes can’t do that so what I’m gonna be doing is actually vinyl wrapping this green tank [Applause] maybe facedown [Laughter]

AIR JORDAN 33 Hands-On Sneaker Reveal

AIR JORDAN 33 Hands-On Sneaker Reveal

I know you’re not afraid of our mission to shave the future fly close your eyes what are you afraid of are you scared of the unknown scared of your own journey towards greatness five four three two one please approach the Air Jordan 33 yo yo yo hey guys jacques slade here and welcome to the launch of the air jordan 33 as you guys know the jordan signature line started in 1985 and we’re already on the 33rd model there’s a couple things that you should know about this model that really set it apart from the models of the past first is the way that they set up the cushioning so there’s a zoom plate here at the toe and there’s a zoom plate here at the heel as you can tell by the red lines that this is a full max zoom unit and the here at the heel they have a hexagonal unit usually these two units are glued into the shoe but this time they’re actually set loose what they call unlocked so you’ll feel them be a lot more responsive and they’ll move with you when you move through your movements another thing about the cushioning is that the flight speed returns generally this was first called flight plate back on the Air Jordan 28 but from the 29 I believe in the 38 31 32 and obviously the 33 they now call it flight speed it is still the same technology this time they actually added more carbon fiber to it which makes it a little bit lighter but also makes it stronger so it’s a little more resilient and responds a lot more with your foot .

the next big thing about the shoe is actually the lacing system as you can tell there really are no laces on the shoe well technically there are no laces on the shoe not in the traditional way that we think about shoe laces they’re using what they call the fast fit system,cheap jordan 11, if you know about golf golf uses this system called BOA where you tighten your shoe and it has these chords that tighten the shoe around your foot Jordan Brand is using that same principle but bringing it to basketball and this is the first time I’ve seen that’s executed in basketball and the way that you basically tighten the shoe with the fast fit system is you pull this cord and you will physically feel it and you’ll also audibly hear clicks that let you know the shoe is getting tighter and tighter if you want to visually see your shoe getting tighter you basically have to look at the bottom if you’ve seen the advertisements about the Air Jordan 33 they show a watch and that’s what this looks like when you tighten it it clicks around in a circle and you’ll see it tightening up around your foot now if you want to eject from the shoe or unlace your shoes you follow the instructions on the shoe .

they have a sign here that says eject that points to this yellow and black looks like a warning almost like a paracord so basically you pull that and you feel it click and it releases your foot and releases the tension and you’re able to take your shoe right off something that is different about the 33 that you usually find with the Jordan line is a sense of luxury generally the materials on the upper the way that the shoe is crafted it tells a story of being luxury but that story isn’t present here with the Air Jordan 33 what they’ve done is they use basic materials that give more of a performance advantage than they do the luxury advantage so this upper is just a thin textile the suede that you hear,jordan 11 china, I have here on the sides on the tongue and on the heel tab that’s just a synthetic suede the leather here at the heel is just synthetic leather and the leather piece that grows across the top that’s just synthetic leather as well going with the retro models of the air jordan line for the past 31 into 32 they had inspiration from the air jordan one in the air jordan to a lot of people.

expected this shoe to have some inspiration from the air jordan three but we don’t see that well not really we see it a little bit this tongue is big like the tongue on the air jordan three although it’s not exactly inspired by the air jordan three we see the nike air here on the heel which is also something that we saw on the air jordan three but it’s not something that is directly taken from the air jordan three if that makes any sense now pricing wise these are going to be a hundred and seventy five dollars here in the US globally there’ll be a hundred and eighty five dollars China in Asia they’re actually going to get the first release of the air jordan thirty three there’s going to be a jade colorway that’s going to release there and then we’ll get them here in the States on the 18th again they’ll be a hundred and seventy-five dollars which is a ten dollar price drop from last year when the shoes were one hundred and eighty five dollars overall the shoe is definitely a divergent it’s a fork in the road for Jordan brand it’s not what we usually see from Jordan Brand ,cheap jordan 11 low,it’s something that kind of breaks the mold of what we’ve seen with the past and that’s really what Jordan Brand is knowing for going outside the box being innovative and creating styles that can play on the court as well as off the court with this model I think it’s going to get a little bit more shine off the court I saw some people walking around today wearing the shoe just casually and it actually looks really nice so it’s something that you may find that’ll be a part of your library as always guys I am Jacques Slade were live from the Jordan 33 launch here in LA I appreciate you if you love this video make sure you like favorite and subscribe and if you really like what you see once you go ahead and turn on your notifications as always guys I appreciate you and I’ll see you soon peace .

Full Custom Boondocks Jordan 11’s

Full Custom Boondocks Jordan 11’s

all right so guys I’m a little sick yeah it’s a gross but it will not stop me from bringing you guys great content today so this is your boy sarado back at you one more time again and we’ve got a new video with a new show this time I know even get a little stagnant lately with the you know do a lot of Space Jam a lot of you know DBZ stuff which I will have another one unfortunately for you later but that’s for a celebrity so this time it’s okay we do a little repeat but for today’s video we are going to be doing a special pair of Boondock 11s okay that is one of my favorite shows by Aaron McGruder way back in the or maybe not way back but back in the day for me anyway you know I said and I just love that show I love the the the characters I love the the the satire the you know the jokes the parodies all of it it was perfect except for last season was a quest perfect but I couldn’t do it another one.

I would have watched I should bring that back but for today’s pair we’re going back to a more simpler version of how I used to do these kind of customs well you know a little bit like a pair of the Tokyo ghoul avatar DBZ Elevens I did weigh like two three years ago another simple like color rush type of pair for this one and hopefully you guys will like it so drop a like stick around watch the next couple of videos click the links don’t click the link do all of that don’t do any of it ,cheap jordan 11,it’s all good but I’ll catch you guys at the end of video so stay tuned all right so now that I found my rest of materials and got all that situated I’m gonna go ahead and clean these shoes off as they’ve been heavily worn before now and I’m gonna clean the treading the soles with our Angela’s easy cleaner.

if you’d like to buy something that’s the link is down below in the description then I’m gonna tape up our midsole and soles and go ahead and lay it out our first few layers of adhesion promoter now I’m going to sort through the reference materials that I picked out as I probably don’t want to use all of these and then I’m gonna go ahead and cut them down to fit our shoe I may need to resize some of these so I’ll go ahead and do that too then I’m gonna use these outline masks to lay down the outline of our characters and then I’m gonna go ahead and tape those off spray down my background and move on to the finer details. tell me what you like bitch I’m living life now I’m gonna go ahead and lay in our facial details and go ahead and start painting as I like to finish each character one by one it gives me a nice finished feel every time I get through one I love in case I want to take a break yourself makes me feel like I finished something. tell me what you like bitch I’m living life.jordan 11 china, also you’ve got to be careful as you’re going about these pieces as constant heat will actually shrink these lace holes here and make it real hard to get your laces back in so be careful with the heat you’re applying you.

now I’m gonna clean up the edges of this patent-leather here and any other trim sections that may still need to be blacked out or completed and I’m gonna go ahead and remove our masking tape check the edges there too as well as the bottom side of that might need to be touched up as well now I’m gonna go ahead and move on to our soul dies well as we’re gonna get rid of these dirty yellowing icy bottom sort of icy bottoms souls that come on the legend’ Elevens and give them a nice black soul that will never go away ,cheap jordan 11 low,I recommend you pad off any extra soul die left over after you’re done to speed up the drying process then I’m going to go ahead and redo all of our line work clean up our piece. so subscribe here to stay up to date with all my works and click the links over here to make sure you watch any of my previous works you know catch up on something you missed or just find something new also to purchase your own custom is you know righto calm.

MT-07FZ-07 Race Fairings Installed!! FZ-07 Rebuild Part 6!!

MT-07FZ-07 Race Fairings Installed!! FZ-07 Rebuild Part 6!!

what’s going on guys welcome back to the channel Eric here good to be back today we have two main goals first trying to get this bodywork mounted on the old f07 and then use some of these two by fours build ourselves a little paint booths looking over the bodywork mostly looks pretty nice there’s a lot of body lines kind of hard to tell the inflection of the a lot of body lines that need to be cleaned up should be too bad once you get primer sanding some body filler but overall the quality food from Andy’s pretty good should we do bad foot on the bike should be pretty quick let’s get back to it let’s get to work check it out you guys so I managed to get the tank and the tail installed like any set of fairings a little bit of finagling to get it perfect but overall looks pretty good these lions are pretty nasty but like usual sanding will clear it all up she looks pretty good so the next thing we’re gonna do we get the front frame installed but before we put it on the bike with the windscreen on so it’s a twenty fifteen to eighteen r1 windscreen then one thing I don’t have currently is this little guy right here this guy sits in the front and you forget to 71 once you be in the mail soon greatest angle on there so let’s get this one screen on so we get this front fairing installed ,cbr 500r fairings,let’s get back to it check it out you guys we got the fairies installed looks pretty darn good can’t complain pretty good fitment overall there’s a few places that do some trimming nothing too major if you will move it trimming under in this side as we’ll miss the frame and then usually I wouldn’t hang the bottom fairing until I got this one installed there’s no actual guide as to where this needs to mount and given that I’m missing the one dowel in here to mount this I could only do one side of the time so I went ahead and just mounted this when this was off the bike a bit of a pain but it was alright so next thing we’re gonna do aside from setting up the paint booth is start cleaning up all these lines on the fairings because there’s a lot of them.

so we’re gonna clean up all the lines on the fairings get them sanded down and then after we get this thing primed in you know I will start you at the base coat etc but first we need to get going on this paint booth so let’s get to it [Applause] check it out you guys so we managed to get the skeleton of our paint booth in the garage done it’s pretty simple simple little skeleton nothing crazy nothing fancy we do have a couple 20-inch fans one for the blowing air in one for pulling the air out we got some filters with that and then we’ve got some plastic sheeting go over the top of this so be a quick little paint booth and then whenever we paint the rx-8 we’ll make it a little bit longer,2006 gsxr 600 fairings, so we can’t fit the entire car in there but for now since all we’re gonna do is paint this little guy this should work just fine essentially everything is 8 by 8 by 8 so the next thing we need to do when you get the sheeting on when you get the box fans in place so we start priming these fairings so let’s get back to it check it out you guys we got the paint booth more or less set up now we got all the sheeting done next thing we’re gonna do hang some lights in here across the side to actually see what’s going on in here what would paint and that’ll be it for this episode and then after that the next episode we’re gonna start standing on the bike so we get it primed finally we get a prime we’ll get base coat on there clear coat etc so that’s come along pretty nicely doesn’t she look pretty hello and the last two think we’re gonna do can put a two fans right here once we’re in air and one for out air anyways let’s get these lights up let’s get back to it check it out .

you guys we’re gonna get the lights hung in a little paint booth nothing crazy nothing too fancy should be enough light though to get us get us started with priming in base coat clear coat etc overall it’s been a good day alright guys that’s it for today ,cheap motorcycle fairings,we we’ve had a pretty productive day we’ve got our paint booth up we’ve got lights installed managed to get our fairing is installed on a bike in the next episode we’re going to start prepping the bodywork for primer base coat clear coat etc so stay tuned for that if you like what you see go ahead and like subscribe and share throw any comments down below that you might have recommendations on painting and as always thanks for watching